JC-3-2500 computer controlled GRP pipe winding prodcution line

Description:
Main technical parameters of JC-3-2500 computer controlled GRP pipe winding prodcution line

I. Computer controlled mortar adding and winding machine:
1. Range of winding diameter: DN200-2500mm
2. Maximum winding length: L=12000mm
3. Gross power: 29.13 KW; the power of main-shaft electric motor is 15KW; the power of running small-trolley is 4 KW;
Computer controlled shaft speed is 0-1500 circles/ min (stepless speed regulating); and the running small trolley is also stepless speed regulated;
4. Winding angle: 45- 90
5. Diameter of main-shaft: 80mm
6. Maximum twisting moment: 5354NM
7. Speed ratio: minimum 23;
8. One-time sand filling quantity: 0.5M30.65Kg/min
9.Yarn drawing speed:
when winding pipe of 1 meter diameter at winding angle of 60 on  main shaft I,  yarn drawing speed is 0-120 meter/min, the maximum drawing speed is 120-meter/min;
when winding pipe of 2 meter diameter at winding angle of 60 on main shaft II , yarn drawing speed is 0-120 meter/min, the maximum drawing speed is 120-meter/min;
when winding pipe of 50 mm diameter at winding angle of 60the yarn drawing speed is 0-60 meter/min
10. Production capacity: 300-800Kg/h
11.  External dimension: (lengthwidthheight) 1800042004800mm
   
II. finishing machine:
1. Diameter of finished FRP pipe: DN200-2,500mm
2. Length of finished FRP pipe: L=12,000mm
3. Gross  power: 10.7KW
4. External dimension: 1646026002500mm

III. Lining machine:
1. Gross power: 12.13KW(including gear pump, stirring machine, resin pump)
2. External dimension: 160004000mm

IV. Demoulding machine:
1.Diameter of FRP pipe to be demould : DN200-2500mm
2. Pushing force of hoisting machine: 40-120T
3. Gross power: 18KW
4. External dimension: 3250040002400mm

V. Curing station: (4sets)
1. Gross power: 64KW
2. Scope of application: 250012000mm

VI. Showering system:
1. Mechanical stirring machine volume: 1M3
2. Power: 12KW
3. Resin pump: 25Kg/min

Price Terms :	FOB